Back to Input PlugITs content page
"Myo" PlugIT
The "Myo" PlugIT allows to connect the Armband Myo device from Thalmic Labs..
The Myo device allows to detect the hand motion and the arm orientation.
Parameters |
|
1 |
Allows to link an object to the Myo. |
2 |
Allows to use coordinates in the local tag of the object. |
Action |
|
Vibrate |
Enable the Myo vibration. The vibration duration can be changed by adding the values 0.1 or 2 in the link parameter. |
Event |
|
Control |
Send the control informations to use to PlugITs owning the "Control" action. |
Orientation |
Set the Myo orientation value. |
Accel |
Set the Myo acceleration vector value. |
Arm recognized |
Send 0 if the right arm is detected, 1 if it is the left arm. |
Arm lost |
Sends if the arm is no longer detected. |
Connected |
Sends if the Myo is connected. |
Disconnected |
Sends if the Myo is disconnected. |
Rest |
Sends when the "Rest" pose is detected. |
Fist |
Sends if the "Flat" pose is detected. |
Wave in |
Sends if the "Wave in" pose is detected. |
Wave out |
Sends if the "Wave out" pose is detected. |
Finger spread |
Sends if the "Finger spread" pose is detected./p> |
Thumb to pinky |
Sends if the "Thumb to pinky" pose is detected. |